Noise Levels in Water Valley, MS | Find Quiet Neighborhoods With Our Sound Map

45 dBA
Average noise across Water Valley
Quiet suburban street at night
580
Residents above the EPA 55 dBA threshold
9% of Water Valley residents
67 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across Water Valley at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Water Valley, MS Map of Noise Levels in Water Valley
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 580 Water Valley residents, or 8.6%, live above that level. By land area, 11.2% of Water Valley is above 55 dBA.

See how noise in Water Valley compares to similar-sized cities.

Noise by Part of Water Valley

Average noise levels for Water Valley residents, grouped by direction from the center of Water Valley. Central Water Valley carries the highest population-weighted average; Eastern Water Valley carries the lowest. Just 0% of residents in Eastern Water Valley live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Central Water Valley.

Central Water Valley

49.3 dBA · Mostly quiet
Quiet office

19% of people above 55 dBA

QuietLoud

Eastern Water Valley

37.3 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Northern Water Valley

48.5 dBA · Mostly quiet
Quiet office

14% of people above 55 dBA

QuietLoud

Southern Water Valley

39.7 dBA · Quiet
Soft rainfall

2% of people above 55 dBA

QuietLoud

Western Water Valley

43.9 dBA · Quiet
Quiet suburban street at night

6% of people above 55 dBA

QuietLoud

Central Water Valley sounds about 130% louder than Eastern Water Valley to the human ear, a 12.0 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Water Valley using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance, faster in vegetated areas and slower over open pavement.

RoadTypeAvg. source dBAPeak source dBA
Ms Hwy 7 Principal arterial 61.2 66
Central St Major collector 54.2 58
Ms Hwy 315 Minor arterial 52.1 56
Ms Hwy 32 Major collector 50.4 55
County Rd 260 Local 55.0 55

How far back from Ms Hwy 7 do you need to be?

Ms Hwy 7 produces an estimated 66 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
66 dBA
Busy restaurant
165 ft
53 dBA
Quiet office to normal conversation
330 ft
46 dBA
Quiet suburban street at night
660 ft
38 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 63% of Water Valley sits under tree canopy (much heavier than most cities) and roughly 7% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

How Noise Is Distributed Across Water Valley

The bar chart below shows the share of Water Valley residents in each noise band. About 97% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Water Valley Compares

Water Valley sits at the quieter end of the spectrum. Below: how Water Valley's average outdoor noise and share of residents above the EPA threshold compare with University, Batesville, Coldwater, and Houston.

Average noise level (dBA)

Water Valley's 44.7 dBA pop-weighted average is at the quieter end of the spectrum. Mississippi as a whole averages 47.9 dBA and the U.S. averages 52.0 dBA. Both are lower than Water Valley because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 8.6% of Water Valley residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 11.2% of Water Valley's footprint sits above 55 dBA, against a Mississippi average of 17.8% and a national average of 28.1%.

What This Means if You're Moving to Water Valley

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Ms Hwy 7 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 63% of Water Valley is under tree cover (much heavier than most cities), and the dominant land cover is low-density developed open space. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.