Noise Levels in Waverly Mills, SC | Find Quiet Neighborhoods With Our Sound Map

43 dBA
Average noise across Waverly Mills
Quiet suburban street at night
1
Residents above the EPA 55 dBA threshold
0% of Waverly Mills residents
58 dBA
Loudest residential point
Normal conversation an arm’s length away

This map shows modeled outdoor noise across Waverly Mills at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Waverly Mills, SC Map of Noise Levels in Waverly Mills
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1 Waverly Mills residents, or 0.2%, live above that level. By land area, 0.4% of Waverly Mills is above 55 dBA.

See how noise in Waverly Mills compares to similar-sized cities.

Noise by Part of Waverly Mills

Average noise levels for Waverly Mills residents, grouped by direction from the center of Waverly Mills. Northern Waverly Mills carries the highest population-weighted average; Western Waverly Mills carries the lowest. Just 0% of residents in Western Waverly Mills live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Northern Waverly Mills.

Northern Waverly Mills

45.0 dBA · Mostly quiet
Quiet suburban street at night

2% of people above 55 dBA

QuietLoud

Southern Waverly Mills

43.9 dBA · Quiet
Quiet suburban street at night

0% of people above 55 dBA

QuietLoud

Western Waverly Mills

35.8 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Northern Waverly Mills sounds about 89% louder than Western Waverly Mills to the human ear, a 9.2 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from Nightingale Dr do you need to be?

Nightingale Dr produces an estimated 54 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
54 dBA
Quiet office to normal conversation
165 ft
40 dBA
Soft rainfall
330 ft
35 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 30% of Waverly Mills sits under tree canopy (about average for cities) and roughly 18% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Waverly Mills

The bar chart below shows the share of Waverly Mills residents in each noise band. About 100% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Waverly Mills Compares

Waverly Mills sits at the quieter end of the spectrum. Below: how Waverly Mills's average outdoor noise and share of residents above the EPA threshold compare with North Litchfield Beach, Kensington, Oatland, and Plantersville.

Average noise level (dBA)

Waverly Mills's 43.1 dBA pop-weighted average is at the quieter end of the spectrum. South Carolina as a whole averages 48.6 dBA and the U.S. averages 52.0 dBA. Both are lower than Waverly Mills because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 0.2% of Waverly Mills residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 0.4% of Waverly Mills's footprint sits above 55 dBA, against a South Carolina average of 15.2% and a national average of 28.1%.

What This Means if You're Moving to Waverly Mills

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Nightingale Dr and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 30% of Waverly Mills is under tree cover (about average for cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.