Noise Levels in Wilbur, PA | Find Quiet Neighborhoods With Our Sound Map
50 dBA
Average noise across Wilbur
Quiet office
19
Residents above the EPA 55 dBA threshold
27% of Wilbur residents
67 dBA
Loudest residential point
Highway traffic 50 ft away
This map shows modeled outdoor noise across Wilbur at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
What the numbers sound like
- 30 dBAWhisper
- 40 dBASoft rainfall
- 45 dBAQuiet suburban street at night
- 50 dBAQuiet office
- 55 dBAEPA outdoor threshold: light traffic 100 ft away
- 60 dBANormal conversation an arm's length away
- 65 dBABusy restaurant
- 70 dBAHighway traffic 50 ft away
- 80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 19 Wilbur residents, or 26.8%, live above that level. By land area, 36.0% of Wilbur is above 55 dBA.
64.0% below 55 dBA
36.0% above 55 dBA
See how noise in Wilbur compares to similar-sized cities.
Noise by Part of Wilbur
Average noise levels for Wilbur residents, grouped by direction from the center of Wilbur. Western Wilbur carries the highest population-weighted average; Eastern Wilbur carries the lowest. Just 3% of residents in Eastern Wilbur live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Western Wilbur.
Eastern Wilbur
43.7 dBA · Quiet
Quiet suburban street at night
Northern Wilbur
46.1 dBA · Mostly quiet
Quiet office
Western Wilbur
66.8 dBA · Loud
Highway traffic 50 ft away
Western Wilbur sounds about 396% louder than Eastern Wilbur to the human ear, a 23.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 67 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
67 dBA
Highway traffic 50 ft away
165 ft
54 dBA
Quiet office to normal conversation
330 ft
46 dBA
Quiet office
660 ft
39 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 25% of Wilbur sits under tree canopy (about average for cities) and roughly 0% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Wilbur. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
How Noise Is Distributed Across Wilbur
The bar chart below shows the share of Wilbur residents in each noise band. About 76% of residents live below the EPA's 55 dBA threshold, and roughly 24% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Wilbur Compares
Wilbur sits at the louder end of the spectrum. Below: how Wilbur's average outdoor noise and share of residents above the EPA threshold compare with Geiger, Hillsview, Daley, and Pine Hill.
Average noise level (dBA)
Wilbur's 49.9 dBA pop-weighted average is at the louder end of the spectrum. Pennsylvania as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than Wilbur because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 26.8% of Wilbur residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 36.0% of Wilbur's footprint sits above 55 dBA, against a Pennsylvania average of 33.5% and a national average of 28.1%.
What This Means if You're Moving to Wilbur
- Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
- Tree canopy can help reduce modeled noise exposure. Roughly 25% of Wilbur is under tree cover (about average for cities), and the dominant land cover is pasture / hay. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
