Noise Levels in Yorkshire, VA | Find Quiet Neighborhoods With Our Sound Map
52 dBA
Average noise across Yorkshire
Quiet office to normal conversation
2,385
Residents above the EPA 55 dBA threshold
23% of Yorkshire residents
77 dBA
Loudest residential point
City bus interior
This map shows modeled outdoor noise across Yorkshire at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2,385 Yorkshire residents, or 22.6%, live above that level. By land area, 28.9% of Yorkshire is above 55 dBA.
Average noise levels for Yorkshire residents, grouped by direction from the center of Yorkshire. Central Yorkshire carries the highest population-weighted average; Northern Yorkshire carries the lowest. Just 13% of residents in Northern Yorkshire live in blocks above the EPA's 55 dBA threshold, a third of the share in Central Yorkshire.
Central Yorkshire
55.7 dBA · Moderate-loud
Quiet office to normal conversation
43% of people above 55 dBA
QuietLoud
Eastern Yorkshire
49.6 dBA · Mostly quiet
Quiet office
14% of people above 55 dBA
QuietLoud
Northern Yorkshire
48.8 dBA · Mostly quiet
Quiet office
13% of people above 55 dBA
QuietLoud
Southern Yorkshire
55.0 dBA · Moderate-loud
Quiet office to normal conversation
26% of people above 55 dBA
QuietLoud
Western Yorkshire
54.1 dBA · Moderate-loud
Quiet office to normal conversation
32% of people above 55 dBA
QuietLoud
Central Yorkshire sounds about 61% louder than Northern Yorkshire to the human ear, a 6.9 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from do you need to be?
produces an estimated 77 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
77 dBA
City bus interior
165 ft
63 dBA
Busy restaurant
330 ft
55 dBA
Quiet office to normal conversation
660 ft
47 dBA
Quiet office
¼ mile
38 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 40% of Yorkshire sits under tree canopy (about average for cities) and roughly 36% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Yorkshire. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
Airport Noise
Washington Dulles International (IAD) sits north of Yorkshire. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of Yorkshire, particularly to the south, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Yorkshire
The bar chart below shows the share of Yorkshire residents in each noise band. About 65% of residents live below the EPA's 55 dBA threshold, and roughly 3% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Yorkshire Compares
Yorkshire sits the lowest among the peer group. Below: how Yorkshire's average outdoor noise and share of residents above the EPA threshold compare with Manassas Park, Clifton, New Baltimore, and Stone Ridge.
Average noise level (dBA)
Yorkshire's 52.1 dBA pop-weighted average is the lowest among the peer group. Virginia as a whole averages 52.8 dBA and the U.S. averages 52.0 dBA. Both are lower than Yorkshire because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 22.6% of Yorkshire residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 28.9% of Yorkshire's footprint sits above 55 dBA, against a Virginia average of 30.0% and a national average of 28.1%.
What This Means if You're Moving to Yorkshire
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 40% of Yorkshire is under tree cover (about average for cities), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Washington Dulles International's approach paths concentrate aviation noise to the north. Neighborhoods to the south of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
