Noise Levels in Anatolia Village, Rancho Cordova, CA | Find Quiet Neighborhoods With Our Sound Map

52 dBA
Average noise across Anatolia Village
Quiet office to normal conversation
874
Residents above the EPA 55 dBA threshold
31% of Anatolia Village residents
71 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Anatolia Village at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Anatolia Village, Rancho Cordova, CA Map of Noise Levels in Anatolia Village
Click the map to explore
35 45 55 EPA 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 874 Anatolia Village residents, or 31.2%, live above that level. By land area, 29.8% of Anatolia Village is above 55 dBA.

See how noise in Anatolia Village compares to similar-sized neighborhoods.

Noise by Part of Anatolia Village

Average noise levels for Anatolia Village residents, grouped by direction from the center of Anatolia Village. The highest population-weighted average is in northwestern Anatolia Village; the lowest is in eastern Anatolia Village, where just 43% of residents live in blocks above the EPA's 55 dBA threshold, roughly the same as the share in the loudest section.

Northwestern Anatolia Village

57.3 dBA · Moderate-loud
Normal conversation an arm’s length away

26% of people above 55 dBA

QuietLoud

Southern Anatolia Village

54.4 dBA · Moderate-loud
Quiet office to normal conversation

48% of people above 55 dBA

QuietLoud

Central Anatolia Village

54.0 dBA · Moderate-loud
Quiet office to normal conversation

44% of people above 55 dBA

QuietLoud

Southeastern Anatolia Village

53.8 dBA · Moderate-loud
Quiet office to normal conversation

43% of people above 55 dBA

QuietLoud

Eastern Anatolia Village

53.7 dBA · Moderate-loud
Quiet office to normal conversation

43% of people above 55 dBA

QuietLoud

To the human ear, noise in northwestern Anatolia Village sounds about 28% louder than in eastern Anatolia Village, a 3.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 71 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
71 dBA
City bus interior
165 ft
56 dBA
Normal conversation an arm’s length away
330 ft
48 dBA
Quiet office
660 ft
39 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 1% of Anatolia Village sits under tree canopy (much lighter than most neighborhoods) and roughly 50% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across Anatolia Village

The bar chart below shows the share of Anatolia Village residents in each noise band. About 78% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Anatolia Village Compares

Anatolia Village sits the lowest among the peer group. Below: how Anatolia Village's average outdoor noise and share of residents above the EPA threshold compare with arden-manor-arden-arcade-ca, Campus Commons, south-east-sacramento-sacramento-ca, and Colonial Manor.

Average noise level (dBA)

Anatolia Village's 52.4 dBA pop-weighted average is the lowest among the peer group. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Anatolia Village because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 31.2% of Anatolia Village residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 29.8% of Anatolia Village's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to Anatolia Village

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 1% of Anatolia Village is under tree cover (much lighter than most neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.