Noise Levels in Central Park, Chicago, IL | Find Quiet Neighborhoods With Our Sound Map

55 dBA
Average noise across Central Park
Quiet office to normal conversation
1,698
Residents above the EPA 55 dBA threshold
39% of Central Park residents
77 dBA
Loudest point in Central Park
City bus interior

This map shows modeled outdoor noise across Central Park at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Central Park, Chicago, IL Map of Noise Levels in Central Park
Click the map to explore
35 45 55 EPA 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,698 Central Park residents, or 39.1%, live above that level. By land area, 50.9% of Central Park is above 55 dBA.

See how noise in Central Park compares to similar-sized neighborhoods.

Noise by Part of Central Park

Average noise levels for Central Park residents, grouped by direction from the center of Central Park. The highest population-weighted average is in western Central Park; the lowest is in southeastern Central Park, where just 43% of residents live in blocks above the EPA's 55 dBA threshold, about two-thirds of the share in the loudest section.

Western Central Park

61.6 dBA · Loud
Busy restaurant

68% of people above 55 dBA

QuietLoud

Central Central Park

60.8 dBA · Loud
Normal conversation an arm’s length away

55% of people above 55 dBA

QuietLoud

Eastern Central Park

57.9 dBA · Moderate-loud
Normal conversation an arm’s length away

61% of people above 55 dBA

QuietLoud

Southeastern Central Park

54.4 dBA · Moderate-loud
Quiet office to normal conversation

43% of people above 55 dBA

QuietLoud

To the human ear, noise in western Central Park sounds about 65% louder than in southeastern Central Park, a 7.2 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Central Park using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance from there.

RoadTypeAvg. source dBAPeak source dBA
Lake St Major collector 58.6 59
Washington Blvd Major collector 56.0 56
N Kilbourn Av Local 55.0 55

How far back from Lake St do you need to be?

Lake St produces an estimated 59 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
59 dBA
Normal conversation an arm’s length away
165 ft
45 dBA
Quiet suburban street at night
330 ft
38 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's distance-decay formula. Where federal land-cover data reaches, the decay rate is set from the place's tree canopy, pavement and land cover. The map above uses one standard rate everywhere.

Rail Noise

Rail lines run through or near parts of Central Park. The U.S. Department of Transportation's National Transportation Noise Map models their noise, and the figures on this page add it to road and aviation noise.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Chicago Midway International (MDW), a commercial airport, lies south of the center of Central Park. Use the Aviation toggle on the map above to see where its modeled noise reaches.

Aviation noise on the map comes from the U.S. Department of Transportation's National Transportation Noise Map, which models noise around the airports it covers. For airports outside that map, BestNeighborhood estimates noise from FAA traffic counts and runway layout, and keeps that estimate on the low side.

How Noise Is Distributed Across Central Park

The bar chart below shows the share of Central Park residents in each noise band. About 62% of residents live below the EPA's 55 dBA threshold, and roughly 7% live in blocks above 60 dBA. A systematic review for the World Health Organization's 2018 Environmental Noise Guidelines found that the risk of ischemic heart disease rises about 8% for every 10 dB increase in long-term road traffic noise.

How Central Park Compares

Central Park sits at the quieter end of the spectrum. Below: how Central Park's average outdoor noise and share of residents above the EPA threshold compare with Moreland, Bricktown, Sauganash, and Andersonville.

Average noise level (dBA)

Central Park's 54.6 dBA pop-weighted average is at the quieter end of the spectrum. Illinois as a whole averages 52.6 dBA, and the U.S. averages 52.0 dBA.

Share of residents above 55 dBA

About 39.1% of Central Park residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 50.9% of Central Park's footprint sits above 55 dBA, against a Illinois average of 29.2% and a national average of 28.1%.

What This Means if You're Moving to Central Park

  • Distance from major roads matters more than the neighborhood name. Two homes in the same ZIP code can differ by more than 15 dBA when one sits 100 meters from a highway and the other 500 meters away. The model works at 100-meter resolution, so noise exposure changes block by block.
  • Land cover sets how fast noise fades in the model. About 4% of Central Park is under tree canopy, much lighter than most neighborhoods, and about 67% is impervious surface such as pavement and rooftops. Its most common land cover is medium-intensity developed land. These figures come from USDA Forest Service and USGS satellite data at 30-meter resolution, and the model uses them to set the rate at which noise fades with distance in Central Park.
  • Airport noise follows the flight paths. Aviation noise concentrates under Chicago Midway International's approach and departure paths, so two homes the same distance from its runways can hear different levels. The Aviation layer on the map shows its modeled footprint.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

Health research cited:
World Health Organization Environmental Noise Guidelines systematic review (2018): road traffic noise and heart disease

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.