Noise Levels in Golden Valley, Milwaukee, WI | Find Quiet Neighborhoods With Our Sound Map

56 dBA
Average noise across Golden Valley
Quiet office to normal conversation
1,068
Residents above the EPA 55 dBA threshold
40% of Golden Valley residents
64 dBA
Loudest residential point
Busy restaurant

This map shows modeled outdoor noise across Golden Valley at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Golden Valley, Milwaukee, WI Map of Noise Levels in Golden Valley
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,068 Golden Valley residents, or 39.7%, live above that level. By land area, 43.9% of Golden Valley is above 55 dBA.

See how noise in Golden Valley compares to similar-sized neighborhoods.

Noise by Part of Golden Valley

Average noise levels for Golden Valley residents, grouped by direction from the center of Golden Valley. Eastern Golden Valley carries the highest population-weighted average; Western Golden Valley carries the lowest. Just 7% of residents in Western Golden Valley live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Eastern Golden Valley.

Central Golden Valley

55.7 dBA · Moderate-loud
Quiet office to normal conversation

38% of people above 55 dBA

QuietLoud

Eastern Golden Valley

57.8 dBA · Moderate-loud
Normal conversation an arm’s length away

64% of people above 55 dBA

QuietLoud

Northern Golden Valley

55.3 dBA · Moderate-loud
Quiet office to normal conversation

33% of people above 55 dBA

QuietLoud

Southern Golden Valley

56.1 dBA · Moderate-loud
Normal conversation an arm’s length away

60% of people above 55 dBA

QuietLoud

Western Golden Valley

52.0 dBA · Moderate
Quiet office to normal conversation

7% of people above 55 dBA

QuietLoud

Eastern Golden Valley sounds about 49% louder than Western Golden Valley to the human ear, a 5.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 64 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
64 dBA
Busy restaurant
165 ft
51 dBA
Quiet office
330 ft
43 dBA
Quiet suburban street at night
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 14% of Golden Valley sits under tree canopy (about average for neighborhoods) and roughly 56% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Airport Noise

General Mitchell International (MKE) sits southeast of Golden Valley. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Golden Valley, particularly to the northwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Golden Valley

The bar chart below shows the share of Golden Valley residents in each noise band. About 45% of residents live below the EPA's 55 dBA threshold, and roughly 7% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Golden Valley Compares

Golden Valley sits at the quieter end of the spectrum. Below: how Golden Valley's average outdoor noise and share of residents above the EPA threshold compare with kops-park-milwaukee-wi, Enderis Park, Long View, and Menomonee River Hills East.

Average noise level (dBA)

Golden Valley's 55.6 dBA pop-weighted average is at the quieter end of the spectrum. Wisconsin as a whole averages 53.0 dBA and the U.S. averages 52.0 dBA. Both are lower than Golden Valley because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 39.7% of Golden Valley residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 43.9% of Golden Valley's footprint sits above 55 dBA, against a Wisconsin average of 29.6% and a national average of 28.1%.

What This Means if You're Moving to Golden Valley

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 14% of Golden Valley is under tree cover (about average for neighborhoods), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. General Mitchell International's approach paths concentrate aviation noise to the southeast. Neighborhoods to the northwest of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.