Noise Levels in Greater Heights, Houston, TX | Find Quiet Neighborhoods With Our Sound Map

54 dBA
Average noise across Greater Heights
Quiet office to normal conversation
14,687
Residents above the EPA 55 dBA threshold
42% of Greater Heights residents
83 dBA
Loudest point in Greater Heights
Food blender at arm’s length

This map shows modeled outdoor noise across Greater Heights at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Greater Heights, Houston, TX Map of Noise Levels in Greater Heights
Click the map to explore
35 45 55 EPA 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 14,687 Greater Heights residents, or 42.2%, live above that level. By land area, 51.4% of Greater Heights is above 55 dBA.

See how noise in Greater Heights compares to similar-sized neighborhoods.

Noise by Part of Greater Heights

Average noise levels for Greater Heights residents, grouped by direction from the center of Greater Heights. The highest population-weighted average is in southwestern Greater Heights; the lowest is in central Greater Heights, where just 28% of residents live in blocks above the EPA's 55 dBA threshold, about half the share in the loudest section.

Southwestern Greater Heights

62.8 dBA · Loud
Busy restaurant

62% of people above 55 dBA

QuietLoud

Southeastern Greater Heights

61.4 dBA · Loud
Busy restaurant

66% of people above 55 dBA

QuietLoud

Northeastern Greater Heights

57.1 dBA · Moderate-loud
Normal conversation an arm’s length away

48% of people above 55 dBA

QuietLoud

Northwestern Greater Heights

53.7 dBA · Moderate-loud
Quiet office to normal conversation

29% of people above 55 dBA

QuietLoud

Central Greater Heights

52.7 dBA · Moderate
Quiet office to normal conversation

28% of people above 55 dBA

QuietLoud

To the human ear, noise in southwestern Greater Heights sounds about 101% louder than in central Greater Heights, a 10.1 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Greater Heights using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance from there.

RoadTypeAvg. source dBAPeak source dBA
US Hwy 290 Major collector 64.8 81
W Loop Fwy Interstate 70.0 81
US Hwy 90 Local 57.6 80
I-10 Local 61.5 80
Katy Fwy Major collector 59.6 80

How far back from US Hwy 290 do you need to be?

US Hwy 290 produces an estimated 81 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
81 dBA
City bus interior
165 ft
67 dBA
Highway traffic 50 ft away
330 ft
59 dBA
Normal conversation an arm’s length away
660 ft
51 dBA
Quiet office
¼ mile
43 dBA
Quiet suburban street at night
½ mile
35 dBA
Soft rainfall

Calculated from the model's distance-decay formula. Where federal land-cover data reaches, the decay rate is set from the place's tree canopy, pavement and land cover. The map above uses one standard rate everywhere.

Rail Noise

Rail lines run through or near parts of Greater Heights. The U.S. Department of Transportation's National Transportation Noise Map models their noise, and the figures on this page add it to road and aviation noise.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

William P Hobby (HOU), a commercial airport, lies southeast of the center of Greater Heights. Use the Aviation toggle on the map above to see where its modeled noise reaches.

Aviation noise on the map comes from the U.S. Department of Transportation's National Transportation Noise Map, which models noise around the airports it covers. For airports outside that map, BestNeighborhood estimates noise from FAA traffic counts and runway layout, and keeps that estimate on the low side.

How Noise Is Distributed Across Greater Heights

The bar chart below shows the share of Greater Heights residents in each noise band. About 54% of residents live below the EPA's 55 dBA threshold, and roughly 11% live in blocks above 60 dBA. A systematic review for the World Health Organization's 2018 Environmental Noise Guidelines found that the risk of ischemic heart disease rises about 8% for every 10 dB increase in long-term road traffic noise.

How Greater Heights Compares

Greater Heights sits at the quieter end of the spectrum. Below: how Greater Heights's average outdoor noise and share of residents above the EPA threshold compare with Medical, Near Northwest, Greater Memorial, and East End.

Average noise level (dBA)

Greater Heights's 54.1 dBA pop-weighted average is at the quieter end of the spectrum. Texas as a whole averages 50.8 dBA, and the U.S. averages 52.0 dBA.

Share of residents above 55 dBA

About 42.2% of Greater Heights residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 51.4% of Greater Heights's footprint sits above 55 dBA, against a Texas average of 22.8% and a national average of 28.1%.

What This Means if You're Moving to Greater Heights

  • Distance from major roads matters more than the neighborhood name. Two homes in the same ZIP code can differ by more than 15 dBA when one sits 100 meters from a highway and the other 500 meters away. The model works at 100-meter resolution, so noise exposure changes block by block.
  • Land cover sets how fast noise fades in the model. About 11% of Greater Heights is under tree canopy, lighter than most neighborhoods, and about 54% is impervious surface such as pavement and rooftops. Its most common land cover is low-intensity developed land. These figures come from USDA Forest Service and USGS satellite data at 30-meter resolution, and the model uses them to set the rate at which noise fades with distance in Greater Heights.
  • Airport noise follows the flight paths. Aviation noise concentrates under William P Hobby's approach and departure paths, so two homes the same distance from its runways can hear different levels. The Aviation layer on the map shows its modeled footprint.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

Health research cited:
World Health Organization Environmental Noise Guidelines systematic review (2018): road traffic noise and heart disease

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.