Noise Levels in Heritage District, Sunnyvale, CA | Find Quiet Neighborhoods With Our Sound Map

55 dBA
Average noise across Heritage District
Quiet office to normal conversation
4,732
Residents above the EPA 55 dBA threshold
53% of Heritage District residents
71 dBA
Loudest point in Heritage District
City bus interior

This map shows modeled outdoor noise across Heritage District at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Heritage District, Sunnyvale, CA Map of Noise Levels in Heritage District
Click the map to explore
35 45 55 EPA 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 4,732 Heritage District residents, or 52.6%, live above that level. By land area, 64.1% of Heritage District is above 55 dBA.

See how noise in Heritage District compares to similar-sized neighborhoods.

Noise by Part of Heritage District

Average noise levels for Heritage District residents, grouped by direction from the center of Heritage District. The highest population-weighted average is in southwestern Heritage District; the lowest is in southern Heritage District, where just 17% of residents live in blocks above the EPA's 55 dBA threshold, a third of the share in the loudest section.

Southwestern Heritage District

61.9 dBA · Loud
Busy restaurant

56% of people above 55 dBA

QuietLoud

Western Heritage District

61.9 dBA · Loud
Busy restaurant

56% of people above 55 dBA

QuietLoud

Central Heritage District

56.2 dBA · Moderate-loud
Normal conversation an arm’s length away

56% of people above 55 dBA

QuietLoud

Southeastern Heritage District

54.3 dBA · Moderate-loud
Quiet office to normal conversation

35% of people above 55 dBA

QuietLoud

Southern Heritage District

54.2 dBA · Moderate-loud
Quiet office to normal conversation

17% of people above 55 dBA

QuietLoud

To the human ear, noise in southwestern Heritage District sounds about 71% louder than in southern Heritage District, a 7.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Rail Noise

Rail lines run through or near parts of Heritage District. The U.S. Department of Transportation's National Transportation Noise Map models their noise, and the figures on this page add it to road and aviation noise.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Norman Y Mineta San Jose International (SJC), a commercial airport, lies east of the center of Heritage District. Use the Aviation toggle on the map above to see where its modeled noise reaches.

Aviation noise on the map comes from the U.S. Department of Transportation's National Transportation Noise Map, which models noise around the airports it covers. For airports outside that map, BestNeighborhood estimates noise from FAA traffic counts and runway layout, and keeps that estimate on the low side.

How Noise Is Distributed Across Heritage District

The bar chart below shows the share of Heritage District residents in each noise band. About 42% of residents live below the EPA's 55 dBA threshold, and roughly 8% live in blocks above 60 dBA. A systematic review for the World Health Organization's 2018 Environmental Noise Guidelines found that the risk of ischemic heart disease rises about 8% for every 10 dB increase in long-term road traffic noise.

How Heritage District Compares

Heritage District sits at the quieter end of the spectrum. Below: how Heritage District's average outdoor noise and share of residents above the EPA threshold compare with Snail, Lakewood, North Los Altos, and Monta Loma.

Average noise level (dBA)

Heritage District's 55.3 dBA pop-weighted average is at the quieter end of the spectrum. California as a whole averages 54.0 dBA, and the U.S. averages 52.0 dBA.

Share of residents above 55 dBA

About 52.6% of Heritage District residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 64.1% of Heritage District's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to Heritage District

  • Distance from major roads matters more than the neighborhood name. Two homes in the same ZIP code can differ by more than 15 dBA when one sits 100 meters from a highway and the other 500 meters away. The model works at 100-meter resolution, so noise exposure changes block by block.
  • Land cover sets how fast noise fades in the model. About 7% of Heritage District is under tree canopy, lighter than most neighborhoods, and about 63% is impervious surface such as pavement and rooftops. Its most common land cover is medium-intensity developed land. These figures come from USDA Forest Service and USGS satellite data at 30-meter resolution, and the model uses them to set the rate at which noise fades with distance in Heritage District.
  • Airport noise follows the flight paths. Aviation noise concentrates under Norman Y Mineta San Jose International's approach and departure paths, so two homes the same distance from its runways can hear different levels. The Aviation layer on the map shows its modeled footprint.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

Health research cited:
World Health Organization Environmental Noise Guidelines systematic review (2018): road traffic noise and heart disease

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.