Noise Levels in Hillsville, PA | Find Quiet Neighborhoods With Our Sound Map
46 dBA
Average noise across Hillsville
Quiet suburban street at night
32
Residents above the EPA 55 dBA threshold
7% of Hillsville residents
85 dBA
Loudest residential point
Food blender at arm’s length
This map shows modeled outdoor noise across Hillsville at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
What the numbers sound like
- 30 dBAWhisper
- 40 dBASoft rainfall
- 45 dBAQuiet suburban street at night
- 50 dBAQuiet office
- 55 dBAEPA outdoor threshold: light traffic 100 ft away
- 60 dBANormal conversation an arm's length away
- 65 dBABusy restaurant
- 70 dBAHighway traffic 50 ft away
- 80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 32 Hillsville residents, or 6.7%, live above that level. By land area, 24.6% of Hillsville is above 55 dBA.
75.4% below 55 dBA
24.6% above 55 dBA
See how noise in Hillsville compares to similar-sized cities.
Noise by Part of Hillsville
Average noise levels for Hillsville residents, grouped by direction from the center of Hillsville. Northern Hillsville carries the highest population-weighted average; Southern Hillsville carries the lowest. Just 0% of residents in Southern Hillsville live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Northern Hillsville.
Central Hillsville
42.8 dBA · Quiet
Quiet suburban street at night
Eastern Hillsville
49.9 dBA · Mostly quiet
Quiet office
Northern Hillsville
51.0 dBA · Moderate
Quiet office
Southern Hillsville
38.4 dBA · Quiet
Soft rainfall
Northern Hillsville sounds about 139% louder than Southern Hillsville to the human ear, a 12.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from Cwmy Churchill Rd do you need to be?
Cwmy Churchill Rd produces an estimated 58 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
58 dBA
Normal conversation an arm’s length away
165 ft
46 dBA
Quiet office
330 ft
39 dBA
Soft rainfall
660 ft
35 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 43% of Hillsville sits under tree canopy (heavier than most cities) and roughly 3% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Hillsville. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
How Noise Is Distributed Across Hillsville
The bar chart below shows the share of Hillsville residents in each noise band. About 98% of residents live below the EPA's 55 dBA threshold, and roughly 2% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Hillsville Compares
Hillsville sits at the quieter end of the spectrum. Below: how Hillsville's average outdoor noise and share of residents above the EPA threshold compare with North Edinburg, South New Castle, Princeton, and Koppel.
Average noise level (dBA)
Hillsville's 45.6 dBA pop-weighted average is at the quieter end of the spectrum. Pennsylvania as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than Hillsville because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 6.7% of Hillsville residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 24.6% of Hillsville's footprint sits above 55 dBA, against a Pennsylvania average of 33.5% and a national average of 28.1%.
What This Means if You're Moving to Hillsville
- Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from Cwmy Churchill Rd and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
- Tree canopy can help reduce modeled noise exposure. Roughly 43% of Hillsville is under tree cover (heavier than most cities), and the dominant land cover is deciduous forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
