Noise Levels in Malden, MA | Find Quiet Neighborhoods With Our Sound Map

56 dBA
Average noise across Malden
Normal conversation an arm’s length away
32,626
Residents above the EPA 55 dBA threshold
61% of Malden residents
81 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Malden at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Malden, MA Map of Noise Levels in Malden
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 32,626 Malden residents, or 61.1%, live above that level. By land area, 65.5% of Malden is above 55 dBA.

See how noise in Malden compares to similar-sized cities.

Noise by Part of Malden

Average noise levels for Malden residents, grouped by direction from the center of Malden. Western Malden carries the highest population-weighted average; Northern Malden carries the lowest. Just 36% of residents in Northern Malden live in blocks above the EPA's 55 dBA threshold, about half the share in Western Malden.

Central Malden

55.2 dBA · Moderate-loud
Quiet office to normal conversation

56% of people above 55 dBA

QuietLoud

Eastern Malden

56.0 dBA · Moderate-loud
Quiet office to normal conversation

52% of people above 55 dBA

QuietLoud

Northern Malden

54.2 dBA · Moderate-loud
Quiet office to normal conversation

36% of people above 55 dBA

QuietLoud

Southern Malden

56.4 dBA · Moderate-loud
Normal conversation an arm’s length away

67% of people above 55 dBA

QuietLoud

Western Malden

58.2 dBA · Loud
Normal conversation an arm’s length away

76% of people above 55 dBA

QuietLoud

Western Malden sounds about 32% louder than Northern Malden to the human ear, a 4.0 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 81 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
81 dBA
City bus interior
165 ft
67 dBA
Highway traffic 50 ft away
330 ft
59 dBA
Normal conversation an arm’s length away
660 ft
51 dBA
Quiet office to normal conversation
¼ mile
43 dBA
Quiet suburban street at night
½ mile
36 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 21% of Malden sits under tree canopy (lighter than most cities) and roughly 58% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of Malden. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

General Edward Lawrence Logan International (BOS) sits southeast of Malden. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 45 dBA on the map's Overall layer. Blocks on the opposite side of Malden, particularly to the northwest, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Malden

The bar chart below shows the share of Malden residents in each noise band. About 36% of residents live below the EPA's 55 dBA threshold, and roughly 16% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Malden Compares

Malden sits at the quieter end of the spectrum. Below: how Malden's average outdoor noise and share of residents above the EPA threshold compare with Revere, Medford, Everett, and Waltham.

Average noise level (dBA)

Malden's 56.5 dBA pop-weighted average is at the quieter end of the spectrum. Massachusetts as a whole averages 54.3 dBA and the U.S. averages 52.0 dBA. Both are lower than Malden because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 61.1% of Malden residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 65.5% of Malden's footprint sits above 55 dBA, against a Massachusetts average of 40.0% and a national average of 28.1%.

What This Means if You're Moving to Malden

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 21% of Malden is under tree cover (lighter than most cities), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. General Edward Lawrence Logan International's approach paths concentrate aviation noise to the southeast. Neighborhoods to the northwest of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.