Noise Levels in Millvale, PA | Find Quiet Neighborhoods With Our Sound Map
58 dBA
Average noise across Millvale
Normal conversation an arm’s length away
1,624
Residents above the EPA 55 dBA threshold
64% of Millvale residents
80 dBA
Loudest residential point
City bus interior
This map shows modeled outdoor noise across Millvale at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 1,624 Millvale residents, or 64.5%, live above that level. By land area, 74.5% of Millvale is above 55 dBA.
Average noise levels for Millvale residents, grouped by direction from the center of Millvale. Southern Millvale carries the highest population-weighted average; Western Millvale carries the lowest. Just 39% of residents in Western Millvale live in blocks above the EPA's 55 dBA threshold, about half the share in Southern Millvale.
Central Millvale
57.4 dBA · Moderate-loud
Normal conversation an arm’s length away
70% of people above 55 dBA
QuietLoud
Northern Millvale
57.1 dBA · Moderate-loud
Normal conversation an arm’s length away
52% of people above 55 dBA
QuietLoud
Southern Millvale
60.3 dBA · Loud
Normal conversation an arm’s length away
78% of people above 55 dBA
QuietLoud
Western Millvale
55.9 dBA · Moderate-loud
Quiet office to normal conversation
39% of people above 55 dBA
QuietLoud
Southern Millvale sounds about 36% louder than Western Millvale to the human ear, a 4.4 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from East Ohio St do you need to be?
East Ohio St produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
75 dBA
City bus interior
165 ft
61 dBA
Busy restaurant
330 ft
53 dBA
Quiet office to normal conversation
660 ft
45 dBA
Quiet suburban street at night
¼ mile
37 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 31% of Millvale sits under tree canopy (about average for cities) and roughly 49% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Millvale. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
Airport Noise
Pittsburgh International (PIT) sits west of Millvale. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Millvale, particularly to the east, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Millvale
The bar chart below shows the share of Millvale residents in each noise band. About 24% of residents live below the EPA's 55 dBA threshold, and roughly 21% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Millvale Compares
Millvale sits at the quieter end of the spectrum. Below: how Millvale's average outdoor noise and share of residents above the EPA threshold compare with Etna, Edgewood, Sharpsburg, and Mount Oliver.
Average noise level (dBA)
Millvale's 57.9 dBA pop-weighted average is at the quieter end of the spectrum. Pennsylvania as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than Millvale because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 64.5% of Millvale residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 74.5% of Millvale's footprint sits above 55 dBA, against a Pennsylvania average of 33.5% and a national average of 28.1%.
What This Means if You're Moving to Millvale
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from East Ohio St and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 31% of Millvale is under tree cover (about average for cities), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Pittsburgh International's approach paths concentrate aviation noise to the west. Neighborhoods to the east of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
