Noise Levels in Mt Vernon Square, Washington, DC | Find Quiet Neighborhoods With Our Sound Map

63 dBA
Average noise across Mt Vernon Square
Busy restaurant
7,244
Residents above the EPA 55 dBA threshold
91% of Mt Vernon Square residents
78 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across Mt Vernon Square at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Mt Vernon Square, Washington, DC Map of Noise Levels in Mt Vernon Square
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 7,244 Mt Vernon Square residents, or 91.4%, live above that level. By land area, 90.0% of Mt Vernon Square is above 55 dBA.

See how noise in Mt Vernon Square compares to similar-sized neighborhoods.

Central Mt Vernon Square sounds about 0% louder than Western Mt Vernon Square to the human ear, a 0.0 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

-->

How far back from do you need to be?

produces an estimated 78 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
78 dBA
City bus interior
165 ft
63 dBA
Busy restaurant
330 ft
55 dBA
Quiet office to normal conversation
660 ft
46 dBA
Quiet office
¼ mile
38 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 2% of Mt Vernon Square sits under tree canopy (much lighter than most neighborhoods) and roughly 77% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Airport Noise

Ronald Reagan Washington Ntl (DCA) sits south of Mt Vernon Square. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of Mt Vernon Square, particularly to the north, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across Mt Vernon Square

The bar chart below shows the share of Mt Vernon Square residents in each noise band. About 0% of residents live below the EPA's 55 dBA threshold, and roughly 72% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How Mt Vernon Square Compares

Mt Vernon Square sits the highest among the peer group. Below: how Mt Vernon Square's average outdoor noise and share of residents above the EPA threshold compare with Downtown, Woodley Park, Ledroit Park, and Barnaby Woods.

Average noise level (dBA)

Mt Vernon Square's 63.4 dBA pop-weighted average is the highest among the peer group. District of Columbia as a whole averages 57.1 dBA and the U.S. averages 52.0 dBA. Both are lower than Mt Vernon Square because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 91.4% of Mt Vernon Square residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 90.0% of Mt Vernon Square's footprint sits above 55 dBA, against a District of Columbia average of 60.6% and a national average of 28.1%.

What This Means if You're Moving to Mt Vernon Square

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 2% of Mt Vernon Square is under tree cover (much lighter than most neighborhoods), and the dominant land cover is high-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Ronald Reagan Washington Ntl's approach paths concentrate aviation noise to the south. Neighborhoods to the north of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.

Nearby Neighborhoods

Neighborhoods with Similar Populations