Noise Levels in Newport County, RI | Find Quiet Neighborhoods With Our Sound Map

52 dBA
Average noise across Newport County
Quiet office to normal conversation
23,965
Residents above the EPA 55 dBA threshold
32% of Newport County residents
79 dBA
Loudest point in Newport County
City bus interior

This map shows modeled outdoor noise across Newport County at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Newport County, RI Map of Noise Levels in Newport County
Click the map to explore
35 45 55 EPA 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 23,965 Newport County residents, or 31.6%, live above that level. By land area, 30.5% of Newport County is above 55 dBA.

See how noise in Newport County compares to similar-sized counties.

Noise by Part of Newport County

Average noise levels for Newport County residents, grouped by direction from the center of Newport County. The highest population-weighted average is in the Portsmouth area (northern Newport County); the lowest is in the Little Compton area (eastern Newport County), where just 3% of residents live in blocks above the EPA's 55 dBA threshold, a fifth of the share in the loudest section.

Portsmouth

56.9 dBA · Moderate-loud
Normal conversation an arm’s length away

23% of people above 55 dBA

QuietLoud

Newport & Newport East

55.3 dBA · Moderate-loud
Quiet office to normal conversation

35% of people above 55 dBA

QuietLoud

Middletown

51.1 dBA · Moderate
Quiet office to normal conversation

16% of people above 55 dBA

QuietLoud

Southeastern Newport County

46.0 dBA · Mostly quiet
Quiet suburban street at night

4% of people above 55 dBA

QuietLoud

Little Compton

45.2 dBA · Mostly quiet
Quiet suburban street at night

3% of people above 55 dBA

QuietLoud

To the human ear, noise in the Portsmouth area (northern Newport County) sounds about 125% louder than in the Little Compton area (eastern Newport County), a 11.7 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

Loudest Road Corridors

The model evaluates every road in Newport County using federal traffic counts, posted speeds, heavy-truck ratios, and pavement type. The source level shown is the modeled noise at the road centerline, where it is loudest. Noise drops with distance from there.

RoadTypeAvg. source dBAPeak source dBA
Ri-138 E Principal arterial 65.0 73
Ri-24 N Freeway 72.5 73
Ri-114 N Principal arterial 64.5 72
Ri-138 W Freeway 66.7 71
Ri-24 S Freeway 69.0 69

How far back from Ri-138 E do you need to be?

Ri-138 E produces an estimated 73 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
73 dBA
City bus interior
165 ft
59 dBA
Normal conversation an arm’s length away
330 ft
52 dBA
Quiet office to normal conversation
660 ft
44 dBA
Quiet suburban street at night
¼ mile
36 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's distance-decay formula. Where federal land-cover data reaches, the decay rate is set from the place's tree canopy, pavement and land cover. The map above uses one standard rate everywhere.

How Noise Is Distributed Across Newport County

The bar chart below shows the share of Newport County residents in each noise band. About 71% of residents live below the EPA's 55 dBA threshold, and roughly 6% live in blocks above 60 dBA. A systematic review for the World Health Organization's 2018 Environmental Noise Guidelines found that the risk of ischemic heart disease rises about 8% for every 10 dB increase in long-term road traffic noise.

How Newport County Compares

Newport County sits at the quieter end of the spectrum. Below: how Newport County's average outdoor noise and share of residents above the EPA threshold compare with Bristol County, Washington County, Kent County, and Providence County.

Average noise level (dBA)

Newport County's 52.3 dBA pop-weighted average is at the quieter end of the spectrum. Rhode Island as a whole averages 53.0 dBA, and the U.S. averages 52.0 dBA.

Share of residents above 55 dBA

About 31.6% of Newport County residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 30.5% of Newport County's footprint sits above 55 dBA, against a Rhode Island average of 36.6% and a national average of 28.1%.

What This Means if You're Moving to Newport County

  • Distance from major roads matters more than the neighborhood name. Two homes in the same ZIP code can differ by more than 15 dBA when one sits 100 meters from a highway and the other 500 meters away. The model works at 100-meter resolution, so noise exposure changes block by block.
  • Land cover sets how fast noise fades in the model. About 32% of Newport County is under tree canopy, heavier than most counties, and about 34% is impervious surface such as pavement and rooftops. Its most common land cover is low-intensity developed land. These figures come from USDA Forest Service and USGS satellite data at 30-meter resolution, and the model uses them to set the rate at which noise fades with distance in Newport County.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

Health research cited:
World Health Organization Environmental Noise Guidelines systematic review (2018): road traffic noise and heart disease

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.