Noise Levels in Providence Forge, VA | Find Quiet Neighborhoods With Our Sound Map
46 dBA
Average noise across Providence Forge
Quiet office
379
Residents above the EPA 55 dBA threshold
8% of Providence Forge residents
93 dBA
Loudest residential point
Power saw
This map shows modeled outdoor noise across Providence Forge at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.
Overall
Road
Rail
Aviation
Click the map to explore
35 dBa55 dBa (EPA limit)90+ dBa
3545557090
Quietest (dBA)Loudest
Colorblind friendlyoff
What the numbers sound like
30 dBAWhisper
40 dBASoft rainfall
45 dBAQuiet suburban street at night
50 dBAQuiet office
55 dBAEPA outdoor threshold: light traffic 100 ft away
60 dBANormal conversation an arm's length away
65 dBABusy restaurant
70 dBAHighway traffic 50 ft away
80 dBACity bus interior
Population Above the EPA Outdoor Threshold
The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 379 Providence Forge residents, or 8.1%, live above that level. By land area, 27.3% of Providence Forge is above 55 dBA.
Average noise levels for Providence Forge residents, grouped by direction from the center of Providence Forge. Eastern Providence Forge carries the highest population-weighted average; Central Providence Forge carries the lowest. Just 0% of residents in Central Providence Forge live in blocks above the EPA's 55 dBA threshold, a fifth of the share in Eastern Providence Forge.
Central Providence Forge
35.9 dBA · Quiet
Soft rainfall
0% of people above 55 dBA
QuietLoud
Eastern Providence Forge
47.1 dBA · Mostly quiet
Quiet office
8% of people above 55 dBA
QuietLoud
Northern Providence Forge
44.1 dBA · Quiet
Quiet suburban street at night
10% of people above 55 dBA
QuietLoud
Southern Providence Forge
43.8 dBA · Quiet
Quiet suburban street at night
13% of people above 55 dBA
QuietLoud
Western Providence Forge
46.7 dBA · Mostly quiet
Quiet office
6% of people above 55 dBA
QuietLoud
Eastern Providence Forge sounds about 117% louder than Central Providence Forge to the human ear, a 11.2 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.
How far back from I-64 do you need to be?
I-64 produces an estimated 75 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.
At source
75 dBA
City bus interior
165 ft
61 dBA
Normal conversation an arm’s length away
330 ft
52 dBA
Quiet office to normal conversation
660 ft
44 dBA
Quiet suburban street at night
¼ mile
36 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall
Calculated from the model's calibrated attenuation formula. About 70% of Providence Forge sits under tree canopy (much heavier than most cities) and roughly 2% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.
-->
Rail Noise
Active freight rail runs through parts of Providence Forge. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.
Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.
Airport Noise
Richmond International (RIC) sits west of Providence Forge. The U.S. Department of Transportation models aviation noise around this airport from federal traffic data, and the model uses those federal measurements rather than synthetic predictions.
Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 65 dBA on the map's Overall layer. Blocks on the opposite side of Providence Forge, particularly to the east, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.
How Noise Is Distributed Across Providence Forge
The bar chart below shows the share of Providence Forge residents in each noise band. About 92% of residents live below the EPA's 55 dBA threshold, and roughly 1% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.
How Providence Forge Compares
Providence Forge sits at the quieter end of the spectrum. Below: how Providence Forge's average outdoor noise and share of residents above the EPA threshold compare with New Kent, Lanexa, Charles City, and West Point.
Average noise level (dBA)
Providence Forge's 46.3 dBA pop-weighted average is at the quieter end of the spectrum. Virginia as a whole averages 52.8 dBA and the U.S. averages 52.0 dBA. Both are lower than Providence Forge because most of either area is rural land away from major roads.
Share of residents above 55 dBA
About 8.1% of Providence Forge residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 27.3% of Providence Forge's footprint sits above 55 dBA, against a Virginia average of 30.0% and a national average of 28.1%.
What This Means if You're Moving to Providence Forge
Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-64 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
Tree canopy can help reduce modeled noise exposure. Roughly 70% of Providence Forge is under tree cover (much heavier than most cities), and the dominant land cover is evergreen forest. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
Airport noise is directional. Richmond International's approach paths concentrate aviation noise to the west. Neighborhoods to the east of downtown show no measurable contribution from the airport.
Sources & Methodology
The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.
All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.
