Noise Levels in San Pedro, CA | Find Quiet Neighborhoods With Our Sound Map

52 dBA
Average noise across San Pedro
Quiet office to normal conversation
17,764
Residents above the EPA 55 dBA threshold
26% of San Pedro residents
83 dBA
Loudest residential point
Food blender at arm’s length

This map shows modeled outdoor noise across San Pedro at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
San Pedro, CA Map of Noise Levels in San Pedro
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 17,764 San Pedro residents, or 26.2%, live above that level. By land area, 29.9% of San Pedro is above 55 dBA.

See how noise in San Pedro compares to similar-sized cities.

Noise by Part of San Pedro

Average noise levels for San Pedro residents, grouped by direction from the center of San Pedro. Southern San Pedro carries the highest population-weighted average; Eastern San Pedro carries the lowest. Just 12% of residents in Eastern San Pedro live in blocks above the EPA's 55 dBA threshold, about half the share in Southern San Pedro.

Central San Pedro

50.3 dBA · Moderate
Quiet office

17% of people above 55 dBA

QuietLoud

Eastern San Pedro

49.3 dBA · Mostly quiet
Quiet office

12% of people above 55 dBA

QuietLoud

Northern San Pedro

52.8 dBA · Moderate
Quiet office to normal conversation

34% of people above 55 dBA

QuietLoud

Southern San Pedro

53.1 dBA · Moderate-loud
Quiet office to normal conversation

33% of people above 55 dBA

QuietLoud

Western San Pedro

52.5 dBA · Moderate
Quiet office to normal conversation

23% of people above 55 dBA

QuietLoud

Southern San Pedro sounds about 30% louder than Eastern San Pedro to the human ear, a 3.8 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from I-110 do you need to be?

I-110 produces an estimated 77 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
77 dBA
City bus interior
165 ft
63 dBA
Busy restaurant
330 ft
55 dBA
Quiet office to normal conversation
660 ft
47 dBA
Quiet office
¼ mile
39 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 4% of San Pedro sits under tree canopy (much lighter than most cities) and roughly 64% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of San Pedro. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

Airport Noise

Los Angeles International (LAX) sits northwest of San Pedro. The U.S. Department of Transportation measures aviation noise around this airport directly, and the model uses those federal measurements rather than synthetic predictions.

Blocks under the approach and departure paths carry combined road-plus-aviation noise, with some exceeding 75 dBA on the map's Overall layer. Blocks on the opposite side of San Pedro, particularly to the southeast, show no measurable aviation contribution. Use the Aviation toggle on the map above to isolate the airport's footprint.

How Noise Is Distributed Across San Pedro

The bar chart below shows the share of San Pedro residents in each noise band. About 75% of residents live below the EPA's 55 dBA threshold, and roughly 7% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How San Pedro Compares

San Pedro sits the lowest among the peer group. Below: how San Pedro's average outdoor noise and share of residents above the EPA threshold compare with Redondo Beach, Carson, Wilmington, and Gardena.

Average noise level (dBA)

San Pedro's 51.9 dBA pop-weighted average is the lowest among the peer group. California as a whole averages 54.0 dBA and the U.S. averages 52.0 dBA. Both are lower than San Pedro because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 26.2% of San Pedro residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 29.9% of San Pedro's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to San Pedro

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from I-110 and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 4% of San Pedro is under tree cover (much lighter than most cities), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.
  • Airport noise is directional. Los Angeles International's approach paths concentrate aviation noise to the northwest. Neighborhoods to the southeast of downtown show no measurable contribution from the airport.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.