Noise Levels in St. Augustine Shores, FL | Find Quiet Neighborhoods With Our Sound Map

47 dBA
Average noise across St. Augustine Shores
Quiet office
676
Residents above the EPA 55 dBA threshold
10% of St. Augustine Shores residents
67 dBA
Loudest residential point
Highway traffic 50 ft away

This map shows modeled outdoor noise across St. Augustine Shores at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
St. Augustine Shores, FL Map of Noise Levels in St. Augustine Shores
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 676 St. Augustine Shores residents, or 10.4%, live above that level. By land area, 13.0% of St. Augustine Shores is above 55 dBA.

See how noise in St. Augustine Shores compares to similar-sized cities.

Noise by Part of St. Augustine Shores

Average noise levels for St. Augustine Shores residents, grouped by direction from the center of St. Augustine Shores. Central St. Augustine Shores carries the highest population-weighted average; Western St. Augustine Shores carries the lowest. Just 4% of residents in Western St. Augustine Shores live in blocks above the EPA's 55 dBA threshold, about half the share in Central St. Augustine Shores.

Central St. Augustine Shores

47.8 dBA · Mostly quiet
Quiet office

10% of people above 55 dBA

QuietLoud

Eastern St. Augustine Shores

47.2 dBA · Mostly quiet
Quiet office

13% of people above 55 dBA

QuietLoud

Northern St. Augustine Shores

46.8 dBA · Mostly quiet
Quiet office

12% of people above 55 dBA

QuietLoud

Southern St. Augustine Shores

46.1 dBA · Mostly quiet
Quiet office

8% of people above 55 dBA

QuietLoud

Western St. Augustine Shores

43.2 dBA · Quiet
Quiet suburban street at night

4% of people above 55 dBA

QuietLoud

Central St. Augustine Shores sounds about 38% louder than Western St. Augustine Shores to the human ear, a 4.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 67 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a soft rainfall.

At source
67 dBA
Highway traffic 50 ft away
165 ft
53 dBA
Quiet office to normal conversation
330 ft
45 dBA
Quiet suburban street at night
660 ft
38 dBA
Soft rainfall
¼ mile
35 dBA
Soft rainfall
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 28% of St. Augustine Shores sits under tree canopy (about average for cities) and roughly 31% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

How Noise Is Distributed Across St. Augustine Shores

The bar chart below shows the share of St. Augustine Shores residents in each noise band. About 93% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How St. Augustine Shores Compares

St. Augustine Shores sits the lowest among the peer group. Below: how St. Augustine Shores's average outdoor noise and share of residents above the EPA threshold compare with St. Augustine Beach, Vermont Heights, St. Augustine South, and Butler Beach.

Average noise level (dBA)

St. Augustine Shores's 46.7 dBA pop-weighted average is the lowest among the peer group. Florida as a whole averages 51.6 dBA and the U.S. averages 52.0 dBA. Both are lower than St. Augustine Shores because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 10.4% of St. Augustine Shores residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's in the middle of its peer group. Measured by land area instead, 13.0% of St. Augustine Shores's footprint sits above 55 dBA, against a Florida average of 31.8% and a national average of 28.1%.

What This Means if You're Moving to St. Augustine Shores

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 28% of St. Augustine Shores is under tree cover (about average for cities), and the dominant land cover is low-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.