Noise Levels in Trinity County, CA | Find Quiet Neighborhoods With Our Sound Map

42 dBA
Average noise across Trinity County
Quiet suburban street at night
648
Residents above the EPA 55 dBA threshold
4% of Trinity County residents
69 dBA
Loudest point in Trinity County
Highway traffic 50 ft away

This map shows modeled outdoor noise across Trinity County at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
Trinity County, CA Map of Noise Levels in Trinity County
Click the map to explore
35 45 55 EPA 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 648 Trinity County residents, or 4.4%, live above that level. By land area, 3.1% of Trinity County is above 55 dBA.

See how noise in Trinity County compares to similar-sized counties.

Noise by Part of Trinity County

Average noise levels for Trinity County residents, grouped by direction from the center of Trinity County. The highest population-weighted average is in the Weaverville area (northeastern Trinity County); the lowest is in northern Trinity County, where just 0% of residents live in blocks above the EPA's 55 dBA threshold, a fifth of the share in the loudest section.

Weaverville

42.4 dBA · Quiet
Quiet suburban street at night

2% of people above 55 dBA

QuietLoud

Northwestern Trinity County

40.5 dBA · Quiet
Soft rainfall

1% of people above 55 dBA

QuietLoud

Southern Trinity County

37.7 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Western Trinity County

37.2 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

Northern Trinity County

36.8 dBA · Quiet
Soft rainfall

0% of people above 55 dBA

QuietLoud

To the human ear, noise in the Weaverville area (northeastern Trinity County) sounds about 47% louder than in northern Trinity County, a 5.6 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How Noise Is Distributed Across Trinity County

The bar chart below shows the share of Trinity County residents in each noise band. About 98% of residents live below the EPA's 55 dBA threshold, and roughly 0% live in blocks above 60 dBA. A systematic review for the World Health Organization's 2018 Environmental Noise Guidelines found that the risk of ischemic heart disease rises about 8% for every 10 dB increase in long-term road traffic noise.

How Trinity County Compares

Trinity County sits the lowest among the peer group. Below: how Trinity County's average outdoor noise and share of residents above the EPA threshold compare with Glenn County, Tehama County, Siskiyou County, and Del Norte County.

Average noise level (dBA)

Trinity County's 41.8 dBA pop-weighted average is the lowest among the peer group. California as a whole averages 54.0 dBA, and the U.S. averages 52.0 dBA.

Share of residents above 55 dBA

About 4.4% of Trinity County residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's fewer than any of its peer group. Measured by land area instead, 3.1% of Trinity County's footprint sits above 55 dBA, against a California average of 36.0% and a national average of 28.1%.

What This Means if You're Moving to Trinity County

  • Distance from major roads matters more than the neighborhood name. Two homes in the same ZIP code can differ by more than 15 dBA when one sits 100 meters from a highway and the other 500 meters away. The model works at 100-meter resolution, so noise exposure changes block by block.
  • Land cover sets how fast noise fades in the model. About 33% of Trinity County is under tree canopy, heavier than most counties, and about 7% is impervious surface such as pavement and rooftops. Its most common land cover is evergreen forest. These figures come from USDA Forest Service and USGS satellite data at 30-meter resolution, and the model uses them to set the rate at which noise fades with distance in Trinity County.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

Health research cited:
World Health Organization Environmental Noise Guidelines systematic review (2018): road traffic noise and heart disease

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.