Noise Levels in West Pittston, PA | Find Quiet Neighborhoods With Our Sound Map

58 dBA
Average noise across West Pittston
Normal conversation an arm’s length away
2,638
Residents above the EPA 55 dBA threshold
73% of West Pittston residents
79 dBA
Loudest residential point
City bus interior

This map shows modeled outdoor noise across West Pittston at 100-meter resolution, combining road, aviation, and rail sources. Green areas measure below 45 dBA. Orange and red exceed the EPA's 55 dBA outdoor threshold linked to long-term health effects. Use the layer toggles to view each source on its own or all together.

Overall
Road
Rail
Aviation
West Pittston, PA Map of Noise Levels in West Pittston
Click the map to explore
35 45 55 70 90
Quietest (dBA) Loudest
Colorblind friendly off

What the numbers sound like

  • 30 dBAWhisper
  • 40 dBASoft rainfall
  • 45 dBAQuiet suburban street at night
  • 50 dBAQuiet office
  • 55 dBAEPA outdoor threshold: light traffic 100 ft away
  • 60 dBANormal conversation an arm's length away
  • 65 dBABusy restaurant
  • 70 dBAHighway traffic 50 ft away
  • 80 dBACity bus interior

Population Above the EPA Outdoor Threshold

The EPA's 55 dBA outdoor reference level is a common benchmark for residential noise exposure, especially for activity interference, annoyance, and long-term community noise concerns. About 2,638 West Pittston residents, or 72.7%, live above that level. By land area, 61.3% of West Pittston is above 55 dBA.

See how noise in West Pittston compares to similar-sized cities.

Noise by Part of West Pittston

Average noise levels for West Pittston residents, grouped by direction from the center of West Pittston. Northern West Pittston carries the highest population-weighted average; Southern West Pittston carries the lowest. Just 49% of residents in Southern West Pittston live in blocks above the EPA's 55 dBA threshold, three-quarters of the share in Northern West Pittston.

Central West Pittston

57.9 dBA · Moderate-loud
Normal conversation an arm’s length away

77% of people above 55 dBA

QuietLoud

Eastern West Pittston

57.3 dBA · Moderate-loud
Normal conversation an arm’s length away

79% of people above 55 dBA

QuietLoud

Northern West Pittston

58.7 dBA · Loud
Normal conversation an arm’s length away

71% of people above 55 dBA

QuietLoud

Southern West Pittston

54.7 dBA · Moderate-loud
Quiet office to normal conversation

49% of people above 55 dBA

QuietLoud

Western West Pittston

58.3 dBA · Loud
Normal conversation an arm’s length away

82% of people above 55 dBA

QuietLoud

Northern West Pittston sounds about 32% louder than Southern West Pittston to the human ear, a 4.0 dBA gap. Every 10 dBA roughly doubles perceived loudness. Within any of these directions, two homes a quarter mile apart can still differ by 10 or more dBA depending on how close they sit to a major highway.

How far back from do you need to be?

produces an estimated 79 dBA at its loudest centerline points. Noise drops logarithmically with distance, with the exact rate depending on what's between you and the road. Tree cover, walls, terrain, and pavement type all matter. At roughly a quarter mile back, traffic fades into the noise level of a quiet suburban street at night.

At source
79 dBA
City bus interior
165 ft
66 dBA
Busy restaurant
330 ft
58 dBA
Normal conversation an arm’s length away
660 ft
50 dBA
Quiet office
¼ mile
42 dBA
Quiet suburban street at night
½ mile
35 dBA
Soft rainfall

Calculated from the model's calibrated attenuation formula. About 15% of West Pittston sits under tree canopy (lighter than most cities) and roughly 57% is impervious surface like pavement and rooftops. Both are folded into the per-place decay rate above. Heavier canopy pulls noise down faster with distance; impervious surfaces slow the drop.

-->

Rail Noise

Active freight rail runs through parts of West Pittston. For most blocks the rail-only contribution is small. Combined road-plus-rail noise rarely exceeds road noise on its own. The exceptions are the handful of blocks within roughly a quarter mile of the right-of-way during pass-through hours.

Use the Rail toggle on the map above to isolate rail's contribution from road and aviation.

How Noise Is Distributed Across West Pittston

The bar chart below shows the share of West Pittston residents in each noise band. About 18% of residents live below the EPA's 55 dBA threshold, and roughly 23% live in blocks above 60 dBA. Long-term exposure in that range is linked to elevated stress hormones and cardiovascular risk.

How West Pittston Compares

West Pittston sits at the louder end of the spectrum. Below: how West Pittston's average outdoor noise and share of residents above the EPA threshold compare with Duryea, Plains, Forty Fort, and Exeter.

Average noise level (dBA)

West Pittston's 57.6 dBA pop-weighted average is at the louder end of the spectrum. Pennsylvania as a whole averages 52.9 dBA and the U.S. averages 52.0 dBA. Both are lower than West Pittston because most of either area is rural land away from major roads.

Share of residents above 55 dBA

About 72.7% of West Pittston residents live in blocks where outdoor levels exceed the EPA's 55 dBA threshold. That's more than any of its peer group. Measured by land area instead, 61.3% of West Pittston's footprint sits above 55 dBA, against a Pennsylvania average of 33.5% and a national average of 28.1%.

What This Means if You're Moving to West Pittston

  • Distance from highways matters more than the neighborhood name. Two homes in the same zip code can differ by 20 dBA if one sits 100 meters from and the other 500 meters away. The model captures this at 100-meter resolution, so noise exposure changes block by block.
  • Tree canopy can help reduce modeled noise exposure. Roughly 15% of West Pittston is under tree cover (lighter than most cities), and the dominant land cover is medium-intensity developed land. Both are measured from federal USDA Forest Service and USGS satellite imagery at 30-meter resolution. Streets with 60% or higher canopy show 3 to 5 dBA lower noise than comparable streets with bare ground or pavement, which is why the per-place decay rate above already accounts for it.

Sources & Methodology

The BestNeighborhood noise model is calibrated against nearly one million federal ground-truth measurements across four states. Road noise is computed from segment-level federal traffic data and propagated outward using physics-based acoustic decay, with attenuation rates that depend on the surrounding land cover.

Federal datasets used:

FHWA Highway Performance Monitoring System: road geometry, traffic counts, lane configuration
U.S. DoT Bureau of Transportation Statistics National Transportation Noise Map: aviation and rail noise, road calibration ground truth
USGS / MRLC National Land Cover Database: land cover and impervious surface coverage
USDA Forest Service Tree Canopy Cover: vegetation density for sound propagation
U.S. Census Bureau TIGER/Line: block-level geography and population
U.S. EPA Levels Document: 55 dBA outdoor reference level

All inputs are published federal datasets. Block-level noise is computed by combining road, rail, and aviation sound sources in the energy domain, the same physics used in professional environmental noise assessments. Read the full methodology.